| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

Commando Scout

Page history last edited by Michael 5 years, 4 months ago

back to the Index, or the Vehicles page

 



 

Development


     The Cadillac Gage Scout (4 x 4) light reconnaissance vehicle has been designed as a private venture specifically for the export market and was first announced in October 1977 at the Association of the United States Army meeting in Washington DC.
     In 1983, it was confirmed that Indonesia had placed an order for 28 Scout vehicles as well as 22 Ranger armoured personnel carriers.
     In August 1986, it was announced that a foreign country had placed a US$22.8 million contract with Cadillac Gage for an undisclosed number of Scout reconnaissance vehicles with half the vehicles delivered in 1986 and the remainder in 1987. Middle East sources confirm that the country is Egypt and 112 vehicles were purchased.
     By early 1989, a total of 140 Scout (4 x 4) vehicles had been built by Cadillac Gage.
 

Description


     The welded hull of the Scout is made of special hardness Cadloy armour plate which will defeat at a minimum 7.62 mm armour-piercing rounds. The front, sides and rear of the hull are well sloped to afford maximum protection within the weight of the vehicle.
     The front of the Scout is sloped at an angle of 76° from the top of the driver's hatch to the nose. In addition to providing ballistic protection it allows the vehicle to push its way through underbrush.
     The driver is seated on the left side of the hull with the engine to his right and is provided with an adjustable seat and a single-piece hatch cover that slides to the front of the vehicle when he is driving with his head out. Driver vision is provided by three periscopes mounted forward of the hatch area.

     The crew of Scout vehicles must be less than 1.85 meters tall; it's even better if they're under 1.7 meters tall (but that's not a requirement). 

    The fuel tank is at the front of the hull between the wheels. The engine is coupled to an Allison Transmission four-speed automatic transmission via a Cadillac Gage power transfer unit. The complete power pack, consisting of the engine, transfer unit, transmission and cooling system, can be removed and replaced in two hours. Access to the engine is by a large hatch in the right side of the hull through which all fluid levels (coolant, lubricant, brake fluids and so on) can be checked.
     The turret or pod is at the rear of the vehicle and access is by a two-part hatch in the rear of the hull with the bottom part folding downwards and the top part opening to the right.
     The front suspension features coil springs over a solid axle with trailing arms. The split rear axle is tied to a heavy-duty coil spring suspension. Cone-shaped passages in the rear of the hull allow for high individual vertical roadwheel travel. Both axles are fitted with positive locking differentials which provide improved traction by preventing one wheel spin-out.

      Tires are 14.5" x 21" tubeless, with Hutchinson run-flat inserts which are good for 50 kilometers once flat. The 14x20 tires used by the V150 can also be used by the Scout (they have the same hub configuration on their wheels), with slighly degraded performance.

      The integral hydraulic power steering is powered by a gear-driven pump working directly off the engine. This approach has eliminated the requirement for belt drives which slip or break and steering cylinders that require maintenance.
     The independent front and rear brake systems function through a split master cylinder and a back-up system supports them in the event of an engine failure. The back-up system consists of an electric motor which supplies pressure to the master cylinder. The tyres are of the run-flat type. Standard equipment includes two hand-held fire extinguishers stowed inside the vehicle, a pioneer toolset, a breaker bar and lug wrench, a first aid kit, a vehicle toolkit, and an air compressor with a 15.24 m hose.
     The Scout is not fitted with an NBC system, has no night vision equipment and is not amphibious. Optional equipment includes a siren/public address system, radio installations, weapon stowage, water and fuel cans, a slave cable, a 15.24 m auxiliary cable, a camouflage net, a smoke grenade system and a fragmentation grenade system.

Specifications


Crew 1 (driver) + others per variant
Number of wheels 4
Number of drive wheels 4
Weight (kg) 7240
Power output to weight ratio (h.p./t) 20.58
Length (mm) 5003
Width (mm) 2057
Height (mm) 2159
Ground clearance (mm) 290
Track (mm) 1660
Wheelbase (mm) 2743
Max. road speed (km/h) 88
Fuel capacity (l) 378
Max. road range (km) 846
Fording depth (mm) 1168
Gradient (%) 60
Side slope (%) 30
Vertical obstance (mm) 609
Trench (mm) 1140
Turning circle radius (mm) 7925
Engine power output (h.p.) 155

 

Status

 

     Production as required. There has been no recent production of the Scout although marketing continues.

 

Manufacturer

 

     Cadillac Gage Company, PO Box 1027, Warren, Michigan 48090, USA

 

Variants


Twin/Combination Machine Gun Turret

     This turret is manually/electrically rotated by a Power Assist Traverse (PAT) system and can be armed with twin 7.62 mm or twin 0.50 calibre machine guns, or a combination of 7.62 mm/0.50 calibre machine guns, which can be elevated from -10 to +55°. Manually traversed rate with PAT is a maximum of 45°/s. The amount of ammunition depends on the armament installed but if twin 7.62 mm calibre weapons are fitted each gun will be provided with 200 rounds of ready use ammunition and 2,200 rounds stowed in the vehicle. If twin 0.50 calibre weapons are fitted, each weapon has 100 rounds of ready use ammunition and 1,000 rounds stowed in the hull. It can also mount a 7.62 mm MG and a 40 mm Mark 19 grenade launcher with 100 ready rounds and 200 rounds stowed in the vehicle -- note that the Project does not use the Mark 19 grenade launcher, however. The turret is also provided with eight vision blocks, an M28C sight with a magnification of x1.5 (x5 magnification optional) and a 500,000 candle-power spotlight mounted coaxially with the weapons.

     This turret uses a standard 1 meter diameter mounting ring.

 

40/50 Turret

     One-man turret armed with a 40 mm Mk 19 grenade launcher and a 12.7 mm M2 machine gun with power traverse and manual elevation. It has eight vision blocks, and a sight with x1 and x8 magnification. 400 rounds of .40 cal ammunition, and 200 rounds of 40mm HV ammunition, are available as ready-use rounds. This turret was produced by Cadillac-Gate in the mid-Eighties for use on the Marine Corps AAV7A1 amphibious assault vehicles, as the "Up Gunned Weapons Station".

 

Since the Morrow Project does not use 40mm "high velocity" ammunition, it's not known what weapons are mounted in this turret -- if this variant of the Scout was ever more than just a prototype for testing.

 

Twin Machine Gun Turret

     This is armed with twin 7.62 mm machine guns which can be fired singly or together and 400 rounds of ready use ammunition are carried with a further 2,200 rounds stowed in the vehicle. It has manual traverse and elevation and the weapons can be elevated from -10 to +55°. The turret is provided with eight vision blocks, and an M28C sight with a magnification of x1.5 (x5 magnification optional); a 500,000 candle-power spotlight is mounted coaxially with the weapons.

 

Command Pod

     This model has a crew of three, commander, radio operator and driver and has a pod mounted on top of the hull in each side of which is a firing port and a vision block. A circular hatch cover is provided on which a 7.62 mm MAG58 machine gun and shield can be mounted. There are 2,200 rounds of 7.62 mm ammunition carried. When fitted with radios the antennas are mounted at the rear of the hull.

TOW Anti-tank

     This model has a crew of two and is fitted with a Raytheon Systems Company TOW ATGW launcher which has a traverse of 120° and can be elevated from -10 to +30°. There are two TOW ATGWs carried inside the hull and provision for a further four missiles outside. A standard TOW ground mount is carried inside the vehicle which enables the TOW system to be deployed away from the vehicle. Two positions for mounting one 7.62 mm MAG58 machine gun are also provided with 2,000 rounds of ammunition being carried for this weapon.

106mm Recoilless Rifle

     This version incorporates a modified pod with top opening doors with armament consisting of a 106 mm M40 series recoilless rifle on a 150° rotating swing mount.

     The weapon backblast cone has been co-ordinated with the slope angles of the vehicle hull to allow 10° of depression and 10° of elevation of the weapon.
     The 106 mm M40 recoilless rifle is aimed using a 12.7 mm barrel-mounted spotting rifle for which 100 rounds of ammunition are carried. A total of 15 rounds of 106 mm ammunition are carried for the M40 recoilless rifle. A standard ground mount for the M40 rifle is carried, allowing it to be deployed away from the vehicle.

 

106mm Recoilless Rifle Turret

     This variant uses the turret of the M50 "Ontos" vehicle, fitted with six M40A1C recoilless rifles. The top four rifles are each fitted with a 12.7mm spotting rifle. A total of 18 rounds of 106mm ammunition are carried for the recoilless rifles, along with 100 rounds of 12.7mm spotting ammunition. The rifles can only be reloaded from outside of the vehicle.

 

20mm Cannon Turret

     This one-man turret is armed with an Oerlikon Contraves 20 mm cannon and a 7.62 mm coaxial machine gun. Turret traverse is powered through 360° with manual back-up, while weapon elevation is from -8 to +55°, also powered with manual back-up.

     The turret is also fitted with an internally controlled hydraulic charger, turret ventilating blower, emergency firing triggers and a rate controller for the 20 mm weapon which allows firing of 1, 2, 4 rds/s or full automatic mode.

     For night surveillance a 500,000 candlepower searchlight is coaxially mounted to the 20 mm cannon. Sighting equipment consists of a x8 monocular sight and unity periscope with projected graticule, eight direct-view vision blocks and an external anti-aircraft sight.

     The turret is designed to carry 200 rounds of ready use 20 mm ammunition and 220 rounds of ready use 7.62 mm ammunition. Hull stowage is provided for 200 rounds of 20 mm and 2,200 rounds of 7.62 mm ammunition.

     This turret uses a standard 1 meter diameter mounting ring.

 

The Project version of this vehicle mounts the Rh202 cannon.

 


 

     More information on the Morrow Project versions of this vehicle will be posted here later. From 1985, mounting plates were welded onto the lower hull for hi-rail conversion sets.

 

Comments (0)

You don't have permission to comment on this page.